🐙 Something Slithery Just Took Over the Windows!
Let three glowing sea-monster arms curl out of windows, climb a covered porch or rise from a dry yard. This coordinated green set creates a playful creature-feature scene without adding an octopus head, sound effects or moving parts.

Three Separate Tentacles, Three Verified Lengths
The set contains exactly three independent inflatable tentacles: 4.5 ft / 54 in / 137.16 cm, 5 ft / 60 in / 152.40 cm and 6 ft / 72 in / 182.88 cm long. Full-product scenes use complete 36-inch windows, a 72-inch door or six-foot fence posts to keep those three different lengths visually consistent.

Product Details
- Quantity: exactly 3 separate inflatable tentacles
- Lengths: 4.5 ft / 54 in / 137.16 cm; 5 ft / 60 in / 152.40 cm; 6 ft / 72 in / 182.88 cm
- Largest-piece retailer field: 72 in long × 15.6 in wide × 15.6 in deep / 182.88 × 39.62 × 39.62 cm
- Shorter-piece width/depth: not separately supplied; no unsupported measurements are added
- Color: bright green with purple edging and lime-yellow printed suction-cup graphics
- Material: polyester shell
- Lighting: built-in white LED illumination
- Inflation: exactly 3 built-in air blowers, one per tentacle
- Power: exactly 3 independent cords and plugs; continuous outlet power required to remain inflated
- Included mounting components: suction cups and fastening ropes; source does not state their quantities
- Plug listing: supplier describes included plugs
- Supplier weather artwork: IP44 splash resistant; not waterproof
- Movement/sound: none stated; no animation or sound effect
- Use location: window, covered porch, dry yard or indoor seasonal display
- Style: Green / 3-Piece Set / 4.5-6 ft
- Brand/model reference: Joyfy / Syncfun 30554

Build a Window, Porch or Yard Creature Scene
Place the three pieces separately to suggest an unseen creature wrapping around the house. Their independent blowers let the 54, 60 and 72-inch arms occupy different windows or dry yard positions, but every unit needs continuous power and its own secure mounting plan.

Independent Polyester Props
Each tentacle is a standalone sewn polyester inflatable with its own wide blower base, power lead and reinforced fastening points. Purple underside edging and lime-yellow printed circles create the suction-cup look; those printed circles are decorative graphics, not the supplied clear mounting suction cups.

White Internal Glow & Dry Protected Power
Built-in white LEDs diffuse through the green polyester while each blower runs. The listing does not promise a flashing, color-changing or animated mode. Keep all plugs and connections dry, use outdoor-rated GFCI protection and route cords under suitable closed in-use weather covers.
Exact Length Guide

Verified product lengths are 4.5 ft / 54 in / 137.16 cm, 5 ft / 60 in / 152.40 cm and 6 ft / 72 in / 182.88 cm. The retailer supplies a 15.6 × 15.6-inch maximum width/depth field for the 72-inch piece but does not provide separate cross-section measurements for the two shorter pieces.
Setup, Power & Outdoor Care
- Unpack all three pieces on a dry surface. Inspect the polyester, seams, tether loops, three blowers, three cords and three plugs before use.
- Temporarily power each unit in a dry protected location to confirm that its blower inflates the piece and its white LEDs illuminate. Every blower must remain connected to power while displayed.
- For smooth-glass placement, clean and dry the glass before seating the supplied suction cups. Test every hold before final positioning; suction cups may release from dirty, textured or unsuitable surfaces.
- Use the supplied fastening ropes only at reinforced loops and follow the included instructions. The source does not specify suction-cup or rope quantities, so this page does not invent counts.
- Plan for three independent plugs. Use outdoor-rated equipment, GFCI protection and closed in-use weather covers appropriate to the installation; keep cords out of walkways and never place a connection in standing water.
- IP44 is a splash-resistance rating, not waterproofing. Unplug and move all three deflated pieces indoors before strong wind, severe storms, flooding, snow or prolonged rain.
- Allow the polyester to dry fully before loose folding. Coil each cord separately and avoid crushing a blower, plug or stitched tether loop during storage.
Product Setup and Styling Guide
Explore practical ways to display and use this item. The product images and specifications on this page show its appearance, intended setup, and seasonal styling possibilities so you can plan a display that suits your space.